Bird and leaf barrier
Solar Panel Critter Guard in Worth, IL
Seal the gap beneath your modules so birds, squirrels and blown-in leaves stay on the outside.
The Gap Under Your Array Is a Pigeon Motel
Rooftop modules ride a few inches above the shingles. A pigeon sees that gap and thinks covered porch. A squirrel sees a pantry with wiring to chew on. Leaves and junk blow in, pile up and hold wet against the roof. A critter guard shuts that gap. It is wire mesh run around the array's perimeter, held on with clips, so nothing gets drilled into the modules. Solar Panel Removal Worth fits critter guard as a standalone job or tacked onto a pull and reset. Tacking it onto a reset is the easy play, because we are already working on the array and the area underneath is open and clean. Birds already living up there? The nests and droppings get cleared before any mesh goes on, so the mess is not sealed inside with nowhere to go. Around Worth and the nearby villages, pigeons drive most of these calls. Same fix regardless of the critter: close the perimeter, keep it closed and stop the mess before it builds.
What a Critter Guard Job Covers
Simple fix. Done with care.
Perimeter walk
We check the gap all the way around and spot where animals get in.
Nest and junk removal
Built-up nesting and debris cleared out ahead of the mesh.
Clip-on wire mesh
Mesh fastened along the edge with clips, never drilled into modules.
Tight corners and seams
Corners closed up so there is no easy way back inside.
Reset add-on
Fitted at the tail end of a pull and reset while the array is open.
How the Mesh Goes On
Tell us what is up there
Birds, squirrels, droppings or leaves, plus a rough module count. A locked-in price comes back over the phone, most times inside 48 hours.
Clean it out
On the day, whatever has piled up beneath the array's edge gets cleared so the barrier closes off a clean space.
Seal the perimeter
Mesh goes on around the full edge, clipped in place, with corners and seams pulled tight.
Why Homeowners Let Us Mesh It
No drilling
Clips hold the mesh, so your modules stay exactly as built.
Cleared before sealed
Old nests and junk never get trapped behind the barrier.
Cheapest during a reset
If the array is coming down for a reroof anyway, that is the moment to add it.
- Clip-on fit
- Nests removed
- Whole perimeter
- Modules left alone
Birds Camping Under the Array?
Describe what is happening up there and how many modules you have. We will price the mesh and set a day.